I wanted to design a small WDT and tamper holder for my coffee setup. The WDT holder should fit the majority of WDT tools out there and the tamper slot is sized to 59mm.
Printed on: Bambu X1 Carbon
Layer Height: 0.2mm
Infill: 15% for the top and 35% at the bottom (if you want a heavier stand)
Material: PLA
Supports: Painted supports for the large overhang on the WDT stand. You can try without supports, but you might have to cut way any parts that sag.
Option:
The author marked this model as their own original creation.