Honeycomb monitor stand (fits 235mm wide board)

I was inspired by other “honeycomb monitor stand” designs available on Printables and modelled my own in Fusion 360. But these other designs don't work for me since I can't source locally (Australia) the correct size timber board. 

This design fits a 235mm wide x 19mm thick timber board.

Here is the exact one I used: 235 x 19mm 1.2m DAR Pine Premium - Bunnings Australia

You can cut the board to any length you prefer. In my case I used 66cm, which appears to be super sturdy. 

No need to tweak slicer settings, the honeycomb pattern is baked into the model.

Files

Honeycomb Monitor Stand v13.stl: Standard version, the stand is 30mm thick.

Honeycomb Monitor Stand Thin v2.stl: Thinner version, the stand is 20mm thick. (40% quicker print time)

15mm hexagonal sanding tool v2.stl: If you are printing with a material that is prone to stringing (eg. in my case wood filament), then you can print this and wrap sanding paper around it to help remove stringing. 

Print Settings

Layer Height: 0.20 - 0.32mm

Nozzle size: 0.40mm

Infill: 15%

Material: PLA (I recommend using a strong PLA filament, in my case Polymaker Polywood was sufficient).

Print orientation: Recommended to print with the honeycomb side on the printed.