fidget spinner

Based on a very classic simple design. Requires four skate board bearings. One for the centre and three for the outside. The bearing should be a tight fit, they are on my printer so good luck with it. 608ZZ for the bearings you can get them on ebay etc.. With a cat head finger protection clip!

Print instructions

Category: 3D Printing Summary

Based on a very classic simple design. Requires four skate board bearings. One for the centre and three for the outside. The bearing should be a tight fit, they are on my printer so good luck with it. 608ZZ for the bearings you can get them on ebay etc.. With a cat head finger protection clip!