Prusa i3 Filament Guide

Made the original a little lower and a bit narrower (15 mm wide). Also, the frame assembly is 0,2 mm longer (the original didn't fit my frame) with a fillet for a nice and easy snap.

Print instructions

Printer Brand: Prusa
Printer: Prusa MK2S
Rafts: No
Supports: No
Resolution: 0,2
Infill: 30% Honeycomb
Notes:

Printed this with 0 top and bottom layers and 30% honeycomb infill to give it a cool structural look.

Version with the cut should be printed with the cut facing the bed.