Unifi G3 Flex Shelf Camera Mount

I had my G3 flex on a shelf, and in a little angled mount. After moving some things around I decided to move the camera up higher. I wanted to mount it under the shelf, but didn't want to screw it in so I made a mount. 

The mount has enough space under it for the cable and holds the camera at a downward 25° angle, and to slip over a shelf of about 40mm.

The original files are in there, so please adjust as needed.

This fits the G3 Flex in a cover using the supplied mounting bracket with the covers. but it should be able to fit the other mounts as well.

This is designed for an m3 12mm machine screw with a socket head and m3 nuts

Printed in PLA on it's side at 20% infill which is probably overkill. 
No Supports needed printed on it's side at .2mm