5/8" x 1/4" x 5/8" Barb Tee

This part was created in order to eliminate leaks between a main 5/8" header and smaller 1/4" drip lines. Printed with the 5/8" side standing vertical on the bed with support up to the 1/4" nozzle. This orientation causes some deformation at the tip of the 1/4" fitting but it does not seem to effect flow or create leaks. Design is v2, could be improved still since the threads do not engage effectively into the 5/8" line.

If you need different sizes, let me know! I actually bought my Mk3 just to print these parts!

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

.15

Infill:

Notes:

6 perimeters minimum to ensure part is water-tight under pressure. Standard Prusa PLA at 215/210C nozzle and 60C bed.

Category: DIY