Side Blower for Voron V0

BOM:

- 1x EBM Papst RLF35-8/14N (Fan)
- 10x M3x25 Buttonhead/Sockethead
- 10x Heatset insert M3x5x4 (Voron standart)
- 2x M3 Nut
- 2x M3x8 Buttonhead/Sockethead

Instalation:

see Pictures for details

I installed the M3 nuts in the Frame at my build. You either have to drill a hole in the slot to insert the nuts or unmount the front extrusion to insert them.

The position is all the way to the front. depenting if you install it left or right. And check there is nothing underneath the deckpanel when you drilling the hole for the wires ;) Would be sad if something get damaged.

I also installed a Klipper expander for additional connections to hook up the fan and more.

Software/printer.cfg:

If you want to have the side blower behave the same as your partcooling fan you have to add this to your "printer.cfg". You might have to correct the pins to what you used.

[multi_pin my_fan]
pins: PC6, expander:PA0

[fan]
pin = multi_pin:my_fan