Bambu P1P Pixel case mod

I had just finished my Pixel mod for the Bambu P1P. I was going to print out the tiles and make an 8bit video game decoration for it. (Leaning towards Galaga)  I had also noticed others were remixing the print so I thought it was a great theme for the new printer. I remixed the original Pac-Man and Ghost to fit the Pixel mod pegs. The rest I designed in Fusion360. The walls, pellets, power pellets, and fruit. I had so much fun I think I will keep adding more 8bit parts like a pixelated Pac-Man and Mrs Pac-Man the ghosts and the rest of the fruits. I printed the parts on the P1P with AMS in multiple filaments. Bambu White, Printbed Blue, Polymaker Purple and light yellow, and a mix of others. I also had help printing the Pellets on the Sovol SV06. If anyone has questions just ask.

Print Settings

Printer:

Bambu P1P

Rafts: 

No

Resolution:

.2mm

Infill: 

10%

Filament: Any PLA Any

Notes:

I Added Painted 3mf files for Bambu printers.

I printed the parts on the P1P with AMS in multiple filaments. Bambu White, Printbed Blue, Polymaker Purple and light yellow, and a mix of others. I also had help printing the Pellets on the Sovol SV06. If anyone has questions just ask.

I also made the details of the pieces at different layer heights so you could also use a"pause at layer height" to do manual filament changes if you don't have an AMS

Post-Printing

Number of Parts

I printed 145 pellets

30 of each wall sections

and 4 power pellets

How I Designed This

I measured the physical parts of the case for the peg size and the spacing. I transferred that in to Fusion 360. I started with the pellets and tested the fit. after that i moved on to the wall sections.

Category: 3D Printer Accessories