M8 Tracker Headless Case

This is a Teensy 4.1 case designed to look like the M8 Tracker by Dirtywave. The button details are designed so you can set up a filament change near the end for accent arrow key vibes.

I'm not too sure about thermals so the Teensy board faces down and I printed the bottom with 0 top/bottom layers. 

Requires: (4) M2 X 8mm socket head cap screws.

Layer height: .2mm 

Supports: Yes, on top cover

Printed in Prusament Galaxy Black PETG and Hatchbox Pastel Green PETG

More info

Teensy 4.1 Headless firmware

M8 Headless setup