Grille mod of 3DO Nozzle camera mount for Voron Stealthburner

Update 2023-05-30

• Added UHF version

Printing instructions

• One color - Use normal Voron printing guidelines
  •    Material: ABS
  •    Layer height: 0.2mm
  •    Extrusion width: 0.4mm
  •    Infill type: Grid, Gyriod, Honeycomb, Triangle or Cube
  •    Infill percentage: 40%
  •    Wall count: 4
  •    Solid top/bottom layers: 5
• Color change
  • The models are made to have the color changed at 0.45mm (0.40mm is ok too) which should be enough for two full layers to get a solid accent color.
• Stroke version
  • Use multi material system or print the accent parts first and then print the rest over it with Z-hop set to at least 0.5mm to avoid collisions. In SuperSlicer/PrusaSlicer right click on the model and select Split -> To Objects to separate the pieces. Then you can set the accents and the rest of the cowling to not printable respectively when printing the other part.

Printed with purple Esun ABS+ and black Esun ABS.

Original model

Printed with 3DO black CF ASA and purple Esun ABS+.

Where to buy the camera

Reseller for different EU/US regions can be found at the bottom of 3DO's github page:

https://github.com/3DO-EU/nozzle-camera