Dual Umbrella and Flash Holder (Cheap Softbox Kit)

Holds a pair of umbrellas, one shoot through and one reflective, and a flash in the middle.

Needs 1 each of the printed parts.  The housing, base, and knob can be printed in PLA or PETG and printed in a 0.2mm layer.  The TPU insert can be printed in 85A or 95A TPU in a 0.2mm layer height.

The hardware is a 1/4-20 1in bolt and a nut with a external tooth 1/4 external tooth washer between them, and 4 x #4 1/2 inch wood screws to hold the plate to the housing.

The base has 2 holes for optional #8-32 or 4mm thumb screws to increase stability on a tripod.

The knob is also my design available here.