Makeup Organizer ... and more

This is a really old project, it's just a makeup organizer. Buuuuut HEY! This one has drawers and an holder for makeup remover wipes!!! Ok ok, enough joking around and yes It's just the umpteenth organizer on internet.

Let's talk about serious stuff.

For this project you need additional:

• 2 x screw M3X10mm (maximum M3x12mm) → for the knob of the drawers.
• 1 x flat head wood screw, diameter 2,5 mm - head diameter 5 ca. - length 20 mm maximum → for the knob of the cover.

Print information:

Cover, drawers and knobs do not require special settings, any predefined profile is fine. 

For the makeup_organizer.stl there are some problems, so:

• It's a huge print, so the room temperature needs to be stable (in my photos there are some imperfections due to this problem).
• Bed adhesion must be perfect.
• The supports consume a lot of plastic so I uploaded a sperimental settings in .3fm file with large pattern spacing. → It might be a good option to print the sectioned model at heights 60,377 mm and 98 mm, then glue the various pieces together.

That's all, happy printing!