Joza TX130 quadcopter frame

I decided to build a 3".
In the contest Make It Fly
11
60
0
425
updated February 1, 2023

Description

PDF

After fooling around with 5" and a whoop, I decided to build a 3". But what fun would it be to design my own frame? Well, it worked out awesome.

The frame is a TrueX, 130mm motor to motor. Overall weight (including props, battery strap, FullSpeed Lucky Box buzzer, no battery) is 91.2 grams.

Full spec posted at RotorBuilds.com https://rotorbuilds.com/build/20092 (I built it back in 2019).

It is designed for a 20x20mm stack. Bottom plate is to be threaded M2 to alow for the stack mounting. Or you can enlarge the holes and use nuts.

Front and rear stand offs are to be threaded M2.

I have had the plates cut out of 3mm carbon fiber plates. 1.5mm for the top plate. Stand offs are printed, front ones are TPU (screws threaded directly into the printed part) and the rear in PETG.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License