Voron Afterburner with Bltouch for CR10 MAX

Made this remix from an already really good source.

It didn't fit my CR10 MAX perfectly, not sure if the sledge is different on the CR10 MAX than the normal CR10.

I adjusted some holes, added another fastening hole and made the BLTouch mount to also use a threaded insert, since the screw into the plastic wasn't very secure and started to wobble easily.

I included all the other files from the Afterburner as well, but only the ones needed for the CR10 MAX build.

You can probably use the current ones from the Voron Github as well, but just in case it gets taken down or changed a lot.

For assembly also check the Voron manual, you can just ignore all the parts that you didn't need to print and continue.

I changed the default CR10 Max settings in PrusaSlicer according to the picture. Changing the bed shape to x: 440 y: 440 and the Origin to x: -5 y: -5

If you have any problems or made the Afterburner successfully write a comment and post a make. It took me quite some time and a lot of prints to get this running, would be glad to see that it paid off.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

200

Infill:

40

Filament: Prusa ABS Orange

Notes:

I used the default Voron settings, 40% infill and 4 perimeters. Not sure if there are more settings needed, just consult the Voron Github.