Flipping around my front fan so it blows air out, removing the front panel completely and adding these mods changed my temps dramatically, especially my nvme SSD was too hot prior to this. Big thanks!
PS: Very precise fit too. Well done modeling (edited)
Jonsbo N1 Fan and HDD Air Ducts
Channel cool air to the CPU & mainboard with shrouds that seal the intake fan gap and HDD frame sides
9
107
1
1156
updated January 24, 2023
Makes
Comments
Applied all the mods from @D3Cove, monitoring does not show any difference in temps for hdd & cpu, but I run fans at <=1000RPM to be silent.
I have a feeling turning the fan so it exhausts at the front would be even better with this.
