Knife Block style desk holder originally designed to hold everyday items such as wallets, keys, loose change, and pens.
Features
- Half-open bottom to allow small objects fall through pen holder slots
- Angled compartments to allow easier grabbing of loose objects such as coins, SD Card, and buttons.
- Large Center Slot with the width of 9.5 cm (~3.75 in.) that allows most wallets to slide in
- 4x 1.0 cm (~0.5 in.) pen slots to hold most pens and permanent markers
- Holder can be arranged in two different orientations
- Simple Design can be easily modified
- External Dimensions: 10cm x 12.5cm x 12.5cm (Width x Depth x Height)
Printing Details
- No specific printing settings were used. Feel Free to use default settings
- Standard 0.4mm nozzle
- Average Print time: ~18 hours at 20% infill (rectilinear pattern)
- No Supports needed
- Adding Brim is recommended if printing environment is not constant
- Filament Used: Generic PLA
- Printer: Any printer is fine
- Slicer Used: PRUSA Slicer Ver.2.5.0
Tags
The author marked this model as their own original creation.