Metric Tap and Die Case

A little case to hold a M3 to M7 sized tap and die pair. It was designed around the Irwin set #1765541, but as I can't find that on their official site I have a feeling it may no longer be in production. However, I would imagine any similarly sized taps and dies could also be fit.

Tips

• Sliced file is for site metrics only, I'd recommend slicing your own.
• Text will likely be rendered better if you use a .4mm nozzle. I used a .6mm one and it's a bit blown out.
• No supports are needed if you print the lid on the flat end.