Dremel 723 Speedclic box inserts

I got a Dremel 723 box with lots of attachments. I saw the indjection muldet inserts that were wasting realy much space. After about 3 hours of designing and 4 hours of printing i had my inserts and was able to free up 2 of the 8 compartments. Tolerances are pretty lose so you can easily get your tools in and out but the inserts itself fit pretty snuggly in the box. However there is one mod that you need to do to your Box. You need to remove the small little tips for structure in every big compartment. I splitted the Attechmants up to 4 Categories: Cleaning/Polishing, Grinding/Sharpening, Sanding and Cutting. 

I provided Gcode for a 0.6 mm nozzle and 195 degress for the nozzle USE AT OWN RISK (Anycubic PLA grey)