Hexagon Threaded Jar

This is a threaded jar with a nice hexagon texture for multiple purposes. It is 60mm wide and 40mm in height.

Printing Instructions

No supports needed. Normal infill (like 15%). The thread will also work with 0.2 layer height. If the thread seams to be a bit narrow you should screw the jar and lid back and forth and then clean the thread with a tissue a couple of times, in order to grind the thread in and make it rotate smooth. The longer you screw, the smoother it gets. If you can't turn the lid, try printing it just a touch bigger. 101% for the lid seems to fit on most printers. Or consider to calibrate your printer. ;-) If the thread does not fit, you probably have an issue with the calibration of your printer.

You might also have a look at my other threaded jars here: https://www.printables.com/model/29293-threaded-jar