Peanut or M&Ms Dispenser

A small dispenser for roasted peanuts or sweets like M&Ms.

You just need a marmelade jar - the cap diameter is 85mm and the cap height 10 mm, it's a pretty common standard.

I also added a cap (for the upside-down mounted jar bottom) for approx. 76,5 mm diamter jars.

The bottom part needs some support for the front, the slider needs support for the handle, the cap would need some support underneat.

All parts to be printed in “normal” orientation.

Top and bottom are connected with 3 Hex Screws M3x12.

I do recommend food-safe PETG filament.