Iphone X stand with wireless charging (Livboj - IKEA)

An easy stand for the Iphone X using a IKEA - Livboj charge plate, just easy drop in charging for night time use mainly. The IKEA charge plate is about $5 and works fine, so perfect for a slow charge during the night.

The stand is fairly stable and you can push pretty hard even on the top part of the phone without any tipping.

Including the Fusion 360 file, changing the part to match most phone and charge plates should be a simple task. In Sketch 1 just change the dimensions of the phone and / or charge plate.

Print Settings

Printer:

Own custom i3

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.15

Infill:

20

Filament:

Glitz Sapphire

Notes:

It's easy to print, if you have decent speed and a cooling fan then supports aren't even really needed. As USB-C cables tend to be fairly stiff, I suggest using glue to fix the charge plate IKEA - Livboj to the stand, to keep the wire from pushing the plate out.

It's basically just extruded from sketches made from dimensions of the phone and the charge plate. A bit of fillets and some easy cuts to get a good lean angle.