K2 Filament Clip w/ToePads

This is a simple remix of the excellent K2 Filament Clips to add toe pads -- small pads that print just in the first layer to hold the points down.   They tear off easily, requiring very little to no cleanup.

This greatly improved printing on my MK3s.  The small points of the original weren't sticking very well.

I've also included a set of six clips sharing toe pads.  This is my preferred way to print these. 

PLA - My Print Settings:  

• 0.4mm Nozzle
• 0.20mm Layer height
• I print at 100% infill. Test print one, and just scale up/down X/Y.

I'm borrowing @K2_Kevin's words of wisdom here: 

NOTE: All printers are different, and calibrated differently. The K2 Clip has very tight tolerances. Test print one in case you need to scale the X/Y up or down.