HSW bling, aka vase mode insert

Honeycomb storage wall bling, is that even a thing?! It is now! Coming in at only 1.7g of filament and 8min print time and promising a satisfying yet easy print, this vase mode honeycomb wall insert is painless to print and really fun to play with!

There two really important print configurations to get this working:

1. Print in vase mode
2. Set number of bottom layers to a number that results in a 2.4mm bottom shell (i.e. 12 layers for 0.2mm layer height) 

I printed these with PLA+ (Fusion Filaments HTPLA+, to be exact) with a 0.4mm nozzle (0.45mm extrusion width - default for PrusaSlicer) and 0.2mm layer height. The resulting inserts have a nice snap feel, minimal wiggle, are easy to pop out, and have withstood multiple reconfigurations.

Works great with PLA also!

Please post your experience with other filaments and configurations!

Made the insert work for vase mode