Minimalist Samla 22L and 65L filament storage remix (screwless and structural reinforcement)

.gallery-skeleton { display: none; }

I did not want to drill my airtight samla boxes and my spools were too heavy, here is my proposal.

162

1767

updated January 19, 2023

Description

For each samla box, print:

For a 4 spools air-tight box you will also need from other sources:

Quantity	Item	Comment
20	Printed washers
6	M8 washers	Can be replaced with 12x printed washers previously mentionned
20	Printed quick release clips
16	608 bearings
1	1m M8 threaded rod	About 340mm cut for 22l and about 470mm cut for 65l
10	Ikea Samla clips (I love this hinged one)
4	PC4-M6 with 4 of this pass-throught Or PC4-M10 with 4 of this pass-throught
4	Ptfe tube about 200mm	Sized to your filament diameter or above
4	Ptfe tube caps like these
1	Door/windows foam seal tape. About 1500mm for 22l, 2000mm for 45-65l	Rubber type preferred

Tested with ikea samla box 22l and 65l (take the v2.0 of the stand leg for the 65l)

Two versions are available for the 8 mm stand leg:

I used double side adhesive tape for the stand legs on two sides (optional) but the preholes (improved) for the screws are still available if needed

The author remixed this model.