Slim Wallet Inserted M3 Nuts

I love the original slim wallet by GLeZz and it has been my daily driver for 2 years. But after dropping it repeatedly and breaking the top part I had to redesign it to increase it's life.

What's new:

1. M3 nuts are encased in the base and the top, allowing for the wallet to be disassembled without wearing out the plastic.
2. The top piece and the pin driving the card slider are now separate parts, allowing for the pin to be printed in a better orientation, making it more drop resistant.
3. Cards can now be placed in the cash tray.

Print Instructions:

1xM3 8mm, 3xM3 6mm, 4xM3 nuts

Print the top and bottom at at .2mm layer height and pause the base at layer 20 and the top at layer 16 to insert the M3 nuts. 

I recommend printing the pin at .1mm and with a brim. Depending on your machine some sanding might be needed to make the part smoot.

Assembly:

Same as the original wallet, just keep an eye on the pin, the bigger end should be on the bottom.