Shelly UNI and other electrical components - Build your own Box

Why?

Most people don't need these, but if you want to arrange some components in your own box, this will help you to save a lot of measurement and test prints to fit them in your box.

List of Components

• Shelly UNI 
• Relais
• PWM Controller 

How to print

Nozzle: 0.4mm
Height: 0.2mm
Supports: Helpful for the PWM but not necessary
Infill: 15-20%
Brim: no

M3 Screws will fit perfectly.

Note

I lost the orientation during the design process, so please flip them to the direction shown on the images. The bridge for the Shelly UNI should - of course - not be printed in the air but on its own spot on the bed. 

Need .stl files? Please leave a comment.