Prusament Spool Bag "Bag-O-Ment"

Create your very own bag out of an empty Prusament spool!

For this project you will need:

• Printed Parts
• Thin fabric 30cm x 80cm
• Fabric for the lining 12cm x 70cm
• Fabric backing (for ironing) 10cm x 70cm
• 2 x fabric backing 1cm x 10cm
• 6 x small magnets (4mm diameter, 2mm thickness)
• At least 3 meters of filament
• Superglue
• Sewing machine
• Sewing yarn in fabric color(s)
• Small needles
• A pen
• Lighter or sand paper
• A handsaw or rotary tool
• An old bag strap (or parts to make one)

See how it's done in the Print Instruction segment.

Enjoy! :-)

Print instructions

First you should print the files.

You will need:
3 x Inlay
1 x Support Bar
2 x Black Spool Part Prusament
2 x Filament Spiral Prusament

All parts can be printed separately.
The Black Spool Parts and the Filament Spirals can be either printed together with an MMU or printed separately and glued together. The Spiral goes on top of the black part.

I printed mine with the MMU2s on the MK3s with a 0.6 nozzle. The GCodes are attached.

How to create the Bag:

I made Step-By-Step instruction pictures for you. Just follow them from "1" to "31" to make your very own Prusament bag.

I hope you enjoy this project.