PotterUSA - Generic Texture Plate Box (190 x 55 x 11)

Thin Storage Box for the average PotterUSA Texture Plate  (190mm x 55mm x 11mm)
 

This can be printed in any filament you need, but I've used PLA and PETG with no issues.  It is just a storage box but shaped specifically for the texture plates sold by POTTERUSA for providing texture to metal with a rolling mill.  

In order to prevent rust you can always lube or wipe the plate down with froglube.

the plate is 11mm tall internally to provide for the “bend” that develops in the plates during production and/or use.   if they are flat plates, you could almost store two inside one box with a piece of brown craft paper between them to prevent scratches and dents.
 

I usually print mine with layers heights of .24 and infill of 10 using the appropriate temps for the filament you've chosen.