Mounting bracket for RB4011 router in 10" rack

Rack mounting bracket that allows you to put a Mikrotik RB4011 in a 10" soho type server rack.

Caveats

The RB4011 is slightly wider than the space between the rails, which means a small portion of the routers face will be behind the rail, this does not inhibit normal use, all ports are accessible. 

Careful

This is a quite a squeeze, use at your own risk. Be careful not to scratch your device on the rails etc., there is a good chance you will make some aesthetic damage to your fancy new gadget.

Print with a fairly high infill, at least 40% and 3+ walls, no support needed, print face down.