Headphone Holder

Elegant, wall-mounted headphones holder. This is fastened to the wall using three 3M poster Command strips (17024).

This model has two parts: a mounting plate and a holding plate. The two parts slide together using two dovetail joints that securely join the parts.

On the back of the mounting plate are indents that show the proper location for the back of the Command strips. If these are aligned correctly, the pull tab on the Command strips will sit perfectly in a remove pull through hole. This makes it easy to remove this from the wall if ever necessary.

On the front of the mounting plate are rectangles that making lining up the part easy to get the perfect alignment on the wall.

The holding plate slides over the mounting plate hiding the alignment rectangles and Command strip removal pulls.

Print instructions

Both parts should be printed at 0.15mm with support on build plate only.

The attached .3MF files have modifiers that increase the infill density on supporting surfaces. I recommend using the .3MF files.