PIR HC-SR501 IR Sensor Enclosure for Arduino and Raspberry Pi

Small enclosure for a HC-SR501 PIR Infrared Sensor. 

Enclosure includes notch for use with a small cable tie to secure the cable so it won't pull out. Additional hole below the sensor hole is for an optional LED if you want to add one to indicate sensor activation. 

There is also an optional cover for times when you want to disable the sensor - just cover the front. Cover stores on the back of the cube when not in use. 

Printed in PLA with 0.4mm nozzle, 0.2mm layer height, no supports. gcode files are for Prusa MK3.

Secure the sensor in the cube with #4 screws, secure the back with #2 screws.