KP3S Shroud New Design

For the DIY peeps amongst us a redesign of the KP3S shroud.

To be used with the Kingroon BLT clone. The files for the case is available on Kingroon's GitHub page.

Fan hole for the 5015 fan is 43mm
Fan hole for the heartbreak is 30mm

The idea is that you design your own fan covers.
Only 3mf and step files are uploaded.
Note that the holes for mounting the duct are for the new Kingroon MX fans. (much more powerful airflow). Available at Kingroon.com
If you don't have MX fans then you will need to lower the holes by 0.8mm.

Weight printed in Kingroon PLA 25.2 grams. 0.2 grams lighter than the metal one.