Levitating Prusament Plattform

This is a levitating Plattform made from an empty Prusament spool.
You will need
1m of nylon thread (I used 0,35mm in diameter)
2 Screws M3 5 to 15mm length
one empty Prusament spool.
unfortunatly i couldn`t upload an PDF you will find the instructions on https://www.dropbox.com/sh/67ppo1oqtqpq0h2/AABBSGqGdY9Fd8ha8VXcivYOa?dl=0

Print instructions

3 Perimeters supports from buildplate only