Ursula 30% Case w/ optional tenting

This case is designed for the 30%, five column variant of the Ursula created by jimmerricks. The case is a gasket mount design with optional tenting and optional underglow. The gasket material I used is linked below and cut to size.

The case fastens with 6mm x 3mm magnets. For the optional tenting you will need M3 heat set inserts and 6mm M3 hex screws.

You can print the entire case without supports. If printing the base with underglow I would recommend using a brim on the inside and outside of the model. The inner lip that the diffuser interfaces with is really thin and prone to lifting and warping without a brim.

Gaskets: https://www.amazon.com/Neoprene-Adhesive-Padding-Multi-Function-Soundproof/dp/B08RB2FWVR/?th=1

Magnets: https://www.amazon.com/DIYMAG-6x3mm-Refrigerator-Premium-Brushed/dp/B07KZQGWNN

Inserts: https://www.amazon.com/gp/product/B09ZNXRD2H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Tenting Legs, Switch Blockers, and Encoder Knobs: https://www.printables.com/model/276982-switch-blockers-tenting-legs-and-knobs