Teradek Bolt 6 RX VESA Mount for Directors Monitor

A simple adapter to mount the Bolt 6 Reciever to a VESA compatible monitor. Including anti rotating pins & cutouts to not cover the Fanholes. 

Needs a single 3/8" Screw. I used one from smallrig, available in their 1713 Screw Kit. If you use a shorter screw, you might need to adjust the spacer inside the hole.

Printed in PLA the mount is strong enough to hold the RX + a Vmount Battery.

Most smaller Screens with USB-C Power use 75 VESA, i added a 100 VESA version as well if you have a bigger monitor.

EDIT: I've added another version with all 4 Contact Points Made for fitting under the König & Meyer 19685 VESA Mount to use it with tripods.