FESTOOL Nut Knob Thread M6

Printer brand: Flying Bear
Printer: Ghost6

I use 4.8 mm high nuts. The depth of the nut cell is designed with a margin of 0.3 mm and is 5.1 mm. The height of the base on which the nut is located is 3 mm.

Print order:
- Print 80 layers (first layer 0.2 mm +79 layers 0.1 mm = 8.1 mm.;
- Print pause;
- An M6 nut is inserted inside;
- Continue printing.

Rafts:No
Supports: No

Wall thickness 2.4 mm
Top/bottom 3 mm

Filament brand: Esun
Filament color: purple
Filament material: PLA+

Slicer: Ultimaker Cura 5.2.1

Wall thickness 2.4 mm
Top/bottom 3 mm
Printing temperature: 220 Celsium
Build plate: 60 Celsium
Print speed: 60 mm/s

The thickness of the handle differs from the original FESTOOL by +1 mm to maintain strength properties.