DIY DREMELL BRUSHLESS

This project involves using a commercial PVC pipe; for the creation of a portable dremel;

Use the attached pdf for the number of parts to be printed and the size of the screws;

A 185W 750KV brushless motor was used to have more torque at low revs;

I used it enough and I must say that it is very functional and powerful;

Surely design can be improved.

I use a 4S lipo.

Here are some links to the main components.

Pay attention to the PVC pipe otherwise the printed support will not adapt (you can scale if desired)

https://tinyurl.com/y9f6xeuh

https://tinyurl.com/yc58nj7h

https://tinyurl.com/yd6bd772

https://tinyurl.com/y7gvd2z4

https://tinyurl.com/ybs8xv76

https://tinyurl.com/ydfftw6d

View 3D online:

https://a360.co/2NT9kTd

Post-Printing