Brackets for LK5 PRO Y-Axis Linear Rail Upgrade

This is my custom design bracket oriented in minimal weight without losing too much rigidity for the MGN12H Linear Rail upgrade on LK5 PRO 3D printer.

Additionally, you will need:

• Heat Bed bracket https://bit.ly/HeatBedBracketLK5
• 2x MGN12 rails 450mm https://s.click.aliexpress.com/e/_DeNYYz5
• 3x MGN12H carriages (possible to use only two but three is recommended)
• 2x 2020 V-slot profiles 500mm long (can be 450mm)
• 28x M3x8mm hex socket screws DIN912
• 13x M3 wide washers DIN9021
• 13x M3 spring lock washer
• 16x non-rotating M3 T-nuts (for V-slot 2020 profiles)
• 12x any M5x8mm screws
• 12x M5 regular washers DIN125
• 12x rotating M5 T-nuts (for V-slot 2040 profiles)
• 1x any M3x18mm bolt for the new end stop

TESTING VIDEO: