I have recently purchased a fiber laser, and while it has this handy bed with a lot of tapped holes, there are no pieces that came with it to utilize as fixtures.
Amazingly, I didn't find anything out there for models of these, so I made my own. Included are various straight lengths, an L, and a cross. If there are other shapes that you feel may be worthwhile, let me know and I'll add to the collection.
The bed of my laser has holes ever 50mm, and uses M6 screws. Using socket head screws will work as well, but these I found at Ace. Each fixture is just a little wider than the head of the screw, and the slots are large enough for the screws as well.
The holes are a little bit tight (intended) so you may have to thread a screw into them once or twice. The slot is oversized, so it shouldn't be a problem (and shouldn't cause it to bubble out).
Printer: Chiron
Rafts: No
Resolution: .2
Infill: 75%
Filament: Overture PLA Black
Notes:
Be careful removing them from the bed, it is easy to bend them if you get too crazy with a spatula
The author marked this model as their own original creation. Imported from Thingiverse.