Hive entrance

Prepare a honey bee hive body or separate stand along entrance such as a slatted rack with a 25 mm hole that allows the entrance to be mounted with space above and below.  Mount alining the center of rounded end to be centered with the hole. 

Honey bees can enter and navigate their own hive easily.  Robbers, pests and predators are confused by being denied the upward movement. 

Print Directions:  Entrance should must have slicer settings to allow bridging be performed perpendicular to the outer walls at 90 degrees.  Requires supports at the outermost open edge to allow a clean print.  

Print settings:

2 or 3 perimaters 
0.4 mm nozzle
0.2 or > layer height
Supports at the outer most open edge.
0-15% infill