AmazonBasics Tripod Shoe

I lost the head for my AmazonBasics tripod, so this is a replacement. You'll need one 1/4"-20 hex bolt, 1/2" long. You may need a shorter bolt depending on your camera. Slide the bolt into the slot, then use the insert to lock it in place. The models include 0.25mm clearance to ensure a reasonable fit.

Tripod: Amazon link

1/2" Hex Bolt: McMaster Carr

Print Settings

Printer Brand:

Monoprice

Printer:

Mini Delta

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.15mm

Infill:

20%

Filament: AmazonBasics PLA Blue