Temperature tower PLA (220° - 180°)
Temperature tower model for PLA. Notice: You need to set different temperatures manually in the slicer! Each cube…
3
97
0
483
updated January 15, 2023
Description
PDFTemperature tower model for PLA.
Notice: You need to set different temperatures manually in the slicer!
Each cube section of the tower is 20mm tall - if you print at 0,2mm resolution (recommended), you need to define a temperature change every 100 layers!
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,2mm
Infill:
25%
Category: 3D Printing TestsTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
