Routing template - Business Card

This is a routing template. With this template and a flush cutter you can cut business cards. The template can be attached to the wood with double-sided tape.

You have to use a flush cutter with a bearing. If you use one without bearing the plastic could melt.

Purchased parts:

Flush Cutter: https://www.amazon.de/dp/B079HZJVVY?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_3W1SJDVGQJX0R44XXW5D&pldnSite=1

Tape: https://www.amazon.de/dp/B079HZJVVY?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_3W1SJDVGQJX0R44XXW5D&pldnSite=1

I did the laser engraving with the Anycubic Mega Pro. In the files are two JPG files, which can be used for laser engraving. Because of the file size I had to upload them as JPG. They can be easily saved with Paint as a 24-bit BMP file.

I engrave the back first, then I mill out the card and then I engrave the front, so the picture of the back is a little bigger than the card itself.

The phone number and the QR code on the pictures do not represent my real contact details, of course.

Laser Engraving Settings:

Laser Height: 53mm

Laser intensity: 40%

Pixel size: 0.1

Printer Settings:

Fill Rate: 100%

I hope you like the design and I look forward to feedback.