Dji Fpv Goggle Shims for Narrow faces

This is a modified version of the "Dji Fpv Goggle Shims" made by kwboost. My head is quite narrow, so I made this version thicker, and shifted more towards the top of the face plate.

Have a look at the instructions provided by kwboost: https://www.thingiverse.com/thing:3840374

Update: After using the first version for a while, I found the shims make a little too tight fit. So I made a second version which is now 12mm on the highest place. My first version were 17mm at the highest point and is the one shown in the pictures. Both version are available.

Mounting tip: After removing the original velcro tape, where the shims are to be mounted, glue the shims to the the goggle using a good quality double adhesive tape. Since the shim has to be bended, when glued on, it will place a constant force on the glue. So bad quality tape, will come loose all the time. I use 3M VHB Tape 4941P which is working great so far.

The velcro tape: I use original Velcro tape with glue.

Print Settings

Printer:

TwoTrees Sapphire S

Rafts:

No

Supports:

No

Infill:

8%

Filament: PolyMaker TPU PolyFlex

Notes:

I use an Infill of only 8% and a wall thickness of only 0.4mm to keep the part as soft as possible.