Wall Hook

This is a simple modern looking wall hook that has a cover to hide the wall dog mount and screw/washer. I needed something simple to hold a grow chart / height board for my kids and wanted it to look nice but still support a large plank of wood. This part is 25mm X 60mm X 15mm. So far its holding well in my kitchen, YMMV.

Print Settings

Printer Brand:

SeeMeCNC

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Notes:

print facing up, use the Cura "Iron" feature to make it look nice. Use some sturdy plastic with good layer adhesion. This was done with Inland Black PLA which I find has EXCELLENT layer adhesion at 210 C. Printing orientation isnt ideal for structure/strength but if you use a good plastic and plenty of infil, it should hold well.

I printed with a 4mm Brim so the parts came off the bed as one. There is about a 1mm gap in the STL but you should be able to print both parts at the same time with this one STL.