Garmin Fenix 7 charger stand - UPDATED

I've printed a few charging stands that hold the puck-style charger for a Garmin Fenix series watch. They've all been fine… but I decided to take a crack at modeling my own.  It's a little more compact than the alternatives, and I tried to make it more than just straight lines. 

Puck-style charger can be found on AMZ: https://a.co/8ctJi8x

First “draft” print was .4 nozzle, .3 layers, 10% infill with PLA. Next print, I plan on better resolution and matte PLA.

You'll need supports if you print it in the orientation that it's in in the file.

Thanks for looking!

UPDATES:

01_14_2023 - centered the cutout for the cord better. AND… finished the first print. All sizes are correct, puck fits great… I'm pleased for now.

01_16_2023 - New version - 1.5. Changes: The base is slimmer in thickness and in width. The support arm has also been thinned out a little bit. Slightly moved the cable clip and filleted the edges a little. I've also removed my initials and the year from the bottom. (Fusion screenshots show v1.5. Real life pics also now show v1.5. 1 pic shows v1 (left) and v1.5 (right) side by side.)

Note: the debossed wolf is not in the included file. I just added it to my personal charger stand.