3D Printer Enclosure Door Hinge

Door hinge for 3D printer enclosure.

It uses M4 bolts.

Overall height is 50mm.

I designed it for 6mm or 1/4" material.

The hinge is snug but not tight and the door is removable. Make sure there are no plastic zits inside the hole and around the pin to avoid binding. If it's too tight you can use a bit of lithium grease or sand the pin slightly.

Happy printing!

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

25% cubic

Filament: PETG Purple

Notes:

You might want to increase the wall thickness and/or your infill for more strength depending on the size and weight of your door.

Category: 3D Printer Accessories