Voron 0 / Voron 0.1 Raspberry Pi Camera Module 3 Mount

CAUTION: If you use the camera module 3, it might prodrude too far into the build volume. If you run into the same problem you might be interested in my center camera mount (https://www.printables.com/model/370373-voron-0-voron-01-raspberry-pi-camera-module-3-moun)

From johanncc's description:

1. Raspberry pi camera mount for the voron 0 / voron 0.1
2. Get up close and personal with the nozzle & the print bed (>80% visible)
3. Easy mounting with 1 M3x16 screw, 1 M3 nut and 1 M2x6 screws
4. NO PRELOADING OF NUTS thank goodness!
5. No supports as always!