Toniebox Tottom Cover

The model:

This is a model of the bottom cover of the Toniebox (audoplayer toy for kids).
There is a normal version which represents how the cover is out of the box and there is a version with an “insert”. This version is for people that use an SD-Card extender to make the SD on the inside excessable from the outside. 

Disclaimer: 

even with the slot it is hard to get at the SD-Card and you probably don't want your kids to get access to it. This is model is ment more as a reference for further modifications.

Printing:

The Model is designed to be printed with the outer ring down. The holes on the underside are bridged and can be cut after print (to minimize support).

Designed to be printed with 0.2mm Layer height.

Files:

There are STLs and Step files of every version. There is also the Source file as a FreeCad Model. Be aware I use the Realthunder Fork of FreeCad so it might not be compatible with the main line version