It prints really well! I added a brim to keep it steady and printed it in Prusament PETG to match the rest of my printer.
Now I just need to figure out how to mount the camera since the hole is too small for the 1/4-20 stud needed to mount a camera.
Ender-3 Max Camera Mount
Ender-3 Max camera mount. Uses the screws on the front of the extrusion frame.
Glued a piece of tin steel to mount a mag
16
133
2
906
updated January 13, 2023
Makes
Comments
Question for the crowd, what way was this oriented for the print?
@JamesHansen_883642 Designed to printed standing up as pictured with no supports. The little tabs at the top printed fine.
Works well and easily threaded for 1/4-20. I would have liked to have seen a channel to make inserting a 1/4-20 bolt from the bottom an option.
I modified mine with a rotary cutting tool. Maybe someone could modify the file.
Thanks. (edited)
View one more comment
@StephCampeau_537734 That's great. Thank you very much.
If you don't mind me asking, what editor are you using? I'm currently trying to learn Fusion360.
@iHenry_600075 I'm using OnShape. Free* and web-based cad.onshape.com